Manzanita Plug in Hybrid photos
Car arriving for kit installation:
The trunk is cleaned out:
The charger is installed in the left fender recess and the Hawker battery box is set into the spare tire well.
The high voltage wiring is installed
After the wiring is installed, the upholstery is reinstalled.
In this photo, the regulators have not yet been installed.
In this photo, the regulators have been installed and are being tested.
The regulators have a unique glow after dark. The photo does not show the polling action of the BMS lighting up the regulators in sequence.
Here is a photo of the Hawker box and charger during fitment into a Ford Escape Hybrid.
Customers have a choice of either the Hawker Case as shown immediately below or the Universal Case shown in the bottom photo.
The Universal case has the contactor box on the left side of the battery box as shown below. The Hawker box uses a separate contactor box that mounts to the right of the Hawker box in the right rear fender.
This page last updated on 5 July
2007 by Joe Smalley
